View NRS5012T100M_4751747.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Notice for TAIYO YUDEN products
Please read this notice before using the TAIYO YUDEN products. REMINDERS
Product information in this catalog is as of October 2009. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called TAIYO YUDEN s official sales channel ). It is only applicable to the products purchased from any of TAIYO YUDEN s official sales channel. Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. Caution for export Certain items in this catalog may require specific procedures for export according to Foreign Exchange and Foreign Trade Control Law of Japan, U.S. Export Administration Regulations , and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. Should you have any question or inquiry on this matter, please contact our sales staff.
notice_e-01
SMD INDUCTORS SMALL AND LARGE CURRENT TYPE
REFLOW
FEATURES
Small and Low profile inductor. It corresponds to High current. Simple and original magnetic shield structure. Durable structure against dropping impact.
APPLICATIONS
For small DC/DC converter (cellular Phone, HDD, DVC, DSC, PDA, LCD display etc).
ORDERING CODE
N
R
H
2
4
1
0
T
T1
Packaging Tape & Reel
Blank Space example
0
0
M
Inductance tolerance M 20% N 30%
Internal code Standard products Blank Space
Type NRH NRS Coating resin specification NRV
External dimensions WxLxH
example
Nominal inductance H 2R2 100 101 2.2 10 100
2410 3010 3012 5012 5014 5020 6010
2.4x2.4x1.0mm 3.0x3.0x1.0mm 3.0x3.0x1.2mm 5.0x5.0x1.2mm 5.0x5.0x1.4mm 5.0x5.0x2.0mm 6.0x6.0x1.0mm
Rdecimal point
EXTERNAL DIMENSIONS/STANDARD QUANTITY
L H e W f e
W e e
Standard Quantity [pcs] Tape & Reel 2500 2000 2000 Standard Quantity [pcs] Tape & Reel 1000 1000 800 1000
L
H e e f
Type NRH2410
L
W
H
e
f
Type NRS5012 NRS5014 NRS5020 NRS6010
L
W
H
e
e
f
2.40.1 2.40.1 1.0 max 0.60.2 1.450.2 0.0950.0040.0950.0040.039 max0.0240.0080.0570.008 1.0 max NRH3010 3.00.1 0.039 max 0.90.2 1.90.2 3.00.1 NRH3012 0.1180.004 0.1180.004 1.2 max 0.0350.0080.0750.008 NRV3012 0.047 max
Recommended Land Patterns
Unitmm inch
1.2 max 0.047 max 4.90.2 4.90.2 1.4 max 1.20.2 0.30.2 3.30.2 1.30.3 0.1930.008 0.1930.008 0.055 max 0.0470.008 0.0110.008 0.1300.008 0.0510.011 2.0 max 0.079 max 0.30.2 4.00.2 2.30.3 6.00.2 6.00.2 1.0 max 1.350.2 0.2360.0080.2360.008 0.039 max 0.0530.008 0.0110.008 0.1570.008 0.0910.011
NRS6010 4.7
Unitmm inch
NRS5012, NRS5014, NRS5020 3.6 2.7 4.0 5.7
NRH2410 1.45 2.0 0.7 0.7
NR3010, NRH3012, NRV3012 2.2
0.8
0.8
1.5
1.5 1.6 1.6
AVAILABLE INDUCTANCE RANGE
Range Type
Imax [mA]
NRH2410
Rdc20 Imax [mA]
NRH3010
Rdc20 Imax [mA]
NRH3012
Rdc20 Imax [mA]
NRV3012
Rdc20 Imax [mA] 2300
NRS5012
Rdc20 Imax [mA] 0.053
NRS5014
Rdc20 Imax [mA]
NRS5020
Rdc20 Imax [mA]
NRS6010
Rdc20
Inductance H
1.0 1410 2.2 4.7 10 22 100 450 300
0.070 1480
0.065 1710
0.048 1100 0.120
3600 2800 0.045 0.100 1300 900
0.021 1900 0.120 1000 0.260 0.090 0.270
0.690 600 1.47 380
0.350 720 0.770 500
0.270 0.630
850
0.420
1800
This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
128
wound05_e-01
PART NUMBERS
NRH 2410 Shielded type
Ordering code NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T NRH2410T R68NN 4 1R0NN 4 1R5MN 2R2MN 3R3MN 4R7MN 6R8MN 100MN 150MN 220MN EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 Inductance Tolerance 30 Self-resonant frequency MHz (min.) 120 106 94 77 56 50 43 32 27 22 DC Resistance [] (20%) 0.060 0.070 0.110 0.150 0.220 0.290 0.410 0.690 1.02 1.47 mA Rated current Saturation Temperature rise current current Idc1 Idc2 2,200 1,570 1,800 1,410 1,550 1,160 1,290 970 1,000 770 880 670 750 570 550 450 470 370 390 300 Measuring frequency kHz
100
20
NRH 3010 Type
FERRITE PRODUCTS
Ordering code NRH3010T NRH3010T NRH3010T NRH3010T NRH3010T NRH3010T NRH3010T NRH3010T NRH3010T 1R2N 1R5N 2R2M 3R3M 4R7M 6R8M 100M 150M 220M
EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS
Inductance [H] 1.2 1.5 2.2 3.3 4.7 6.8 10 15 22
Inductance Tolerance 30
Self-resonant frequency MHz (min.) 120 99 86 64 50 44 34 25 22
DC Resistance [] (20%) 0.065 0.075 0.083 0.130 0.170 0.250 0.350 0.550 0.770
20
mA Rated current Saturation Temperature rise current current Idc1 Idc2 1,700 1,480 1,440 1,370 1,300 1,300 1,000 1,030 850 900 700 745 600 620 450 480 380 410
Measuring frequency kHz
100
NRH 3012 Type
Ordering code NRH3012T NRH3012T NRH3012T NRH3012T NRH3012T NRH3012T NRH3012T NRH3012T NRH3012T 1R0N 1R5N 2R2M 3R3M 4R7M 6R8M 100M 150M 220M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 Inductance Tolerance 30 Self-resonant frequency MHz (min.) 111 95 78 61 50 43 32 26 22 DC Resistance [] (20) 0.048 0.055 0.075 0.100 0.130 0.190 0.270 0.450 0.630 mA Rated current Saturation Temperature rise current current Idc1 Idc2 2,200 1,710 1,700 1,600 1,500 1,370 1,200 1,210 1,000 1,060 850 890 730 720 530 570 500 500 Measuring frequency kHz
100
20
NRV 3012 Type
EHS (Environmental Hazardous Substances) RoHS Inductance [H] 2.2 Inductance Tolerance 20 Self-resonant frequency MHz (min.) 70 DC Resistance [] (20) 0.120 mA Rated current Saturation Temperature rise current current Idc1 Idc2 1,800 1,100 Measuring frequency kHz 100
Ordering code NRV3012T 2R2M
NRS 5012 Type
Ordering code NRS5012T NRS5012T NRS5012T NRS5012T NRS5012T NRS5012T NRS5012T 1R0N 1R5N 2R2M 3R3M 4R7M 6R8M 100M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 1.5 2.2 3.3 4.7 6.8 10 Inductance Tolerance 30 Self-resonant frequency MHz (min.) 100 86 70 48 40 36 26 DC Resistance [] (20) 0.053 0.070 0.085 0.160 0.180 0.260 0.420 mA Rated current Saturation Temperature rise current current Idc1 Idc2 4,500 2,300 3,800 2,200 3,100 2,000 2,400 1,450 2,200 1,400 1,700 1,100 1,400 850 Measuring frequency kHz
100
20
NRS 5014 Type
EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS Inductance [H]
1.2 2.2 3.3 4.7
Ordering code
NRS5014T 1R2N NRS5014T 2R2N NRS5014T 3R3N NRS5014T 4R7N
Inductance Tolerance
Self-resonant frequency MHz (min.) 86 56
48 41
DC Resistance [] (20)
0.045 0.065
mA Rated current Saturation Temperature rise current current Idc1 Idc2
3,800 2,800 2,350 2,050 2,800 2,300 2,100 1,800
Measuring frequency kHz
30
0.080 0.100
100
This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound05_e-01
129
PART NUMBERS
NRS 5020 Type
Ordering code NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T NRS5020T 1R0N 1R5N 2R2N 3R3N 4R7M 6R8M 100M 150M 220M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H] 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 Inductance Tolerance Self-resonant frequency MHz (min.) 81 68 57 46 37 30 24 20 17 DC Resistance [] (20) 0.021 0.026 0.035 0.048 0.060 0.090 0.120 0.165 0.260 mA Rated current Saturation Temperature rise current current Idc1 Idc2 4,000 3,600 3,350 3,200 2,900 2,900 2,400 2,400 2,000 2,000 1,600 1,650 1,300 1,450 1,100 1,200 900 1,000 Measuring frequency kHz
30
100
20
NRS 6010 Type
Ordering code NRS6010T NRS6010T NRS6010T NRS6010T NRS6010T NRS6010T 1R5N 2R2N 3R3N 4R7N 6R8N 100M EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS Inductance [H]
1.5 2.2 3.3 4.7 6.8 10
Inductance Tolerance
Self-resonant frequency MHz (min.) 90 65 50 38 30 25
DC Resistance [] (20) 0.090 0.110 0.135 0.165 0.220 0.270
30
20
mA Rated current Saturation Temperature rise current current Idc1 Idc2 1,900 2,400 1,900 1,700 1,600 1,500 1,300 1,400 1,200 1,200 1,000 1,100
Measuring frequency kHz
100
saturation current value (Idc1) is the DC current value having inductance decrease down to 30%. (at 20) The temperature rise current value (Idc2) is the DC current value having temperature increase up to 40. (at 20) The rated current is the DC current value that satisfies both of current value saturation current value and temperature rise current value. The
This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
130
wound05_e-01
ELECTRICAL CHARACTERISTICS DC Bias characteristics
NRH 2410
100 100
Measured by HP4285A
NRH 3010
100
NRH 3012
100
NRV 3012
220M
220M
220M
10
100M
10
100M
10
10
H
H
H
Inductance
Inductance
Inductance
4R7M
2R2M
2R2M
2R2M
Inductance
4R7M
4R7M
H
100M
2R2M
1
1R0N
1
1
1R0N
1
FERRITE PRODUCTS
0.1 10
100
1,000
10,000
0.1 10
100
1,000
10,000
0.1 10
100
1,000
10,000
0.1 10
100
1,000
10,000
DC Bias mA
DC Bias mA
DC Bias mA
DC Bias mA
NRS 5012
100 100
NRS 5014
100
NRS 5020
100
NRS 6010
200M
10
100M
10
10
100M
10
100M
H
H
H
Inductance
Inductance
Inductance
4R7M
4R7M
2R2M
2R2N
Inductance
4R7M
H
4R7M
2R2N
1
1R0N
1
1R2N
1
1R0N
1
0.1 10
100
1,000
10,000
0.1 10
100
1,000
10,000
0.1 10
100
1,000
10,000
0.1 10
100
1,000
10,000
DC Bias mA
DC Bias mA
DC Bias mA
DC Bias mA
This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound05_e-01
131
PACKAGING
Minimum Quantity
Type NRH 2410 NR 3010/NRH 3010 NR 3012/NRH3012/NRV3012 NR 3015 NR 4010 NR 4012 NR 4018 NRG4026 NRS5012 NRS5014 NRS5020 NR 5040 NRS6010 NR 6012 NR 6020 NR 6028 NR 6045 NR 8040 Standard Quantity [pcs] Tape Reel 2500 2000 2000 2000 5000 4500 3500 2000 1000 1000 800 1500 1000 1000 2500 2000 1500 1000 Type NR 4010 NR 4012 NR 4018 NRG 4026 NRS 5012 NRS 5014 NRS 5020 5.250.1 5.250.1 0.2070.004 0.2070.004 Chip cavity A B Insertion pitch F Tape thickness T K 1.40.1 0.0550.004 4.30.1 4.30.1 0.1690.004 0.1690.004 1.60.1 0.0630.004 2.10.1 0.0830.004 0.30.05 3.10.1 0.0120.002 0.1220.004 1.40.1 0.0550.004 1.60.1 0.0630.004 2.30.1 0.0910.004 4.20.1 0.1650.004 1.40.1 0.0550.004 1.60.1 0.0630.004
8.00.1 0.3150.004 5.150.1 5.150.1 NR 5040 0.2030.004 0.2030.004
NRS 6010 NR 6012 NR 6020 NR 6028 NR 6045 6.30.1 6.30.1 0.2480.004 0.2480.004
0.40.1 0.0160.004 2.30.1 0.0900.004
Tape Material
3.10.1 0.1220.004 4.70.1 0.1850.004
Unit : mm (inch)
Embossed tape 16mm wide (0.63 inches wide)
2.0 0.1 0.079 0.004 4.0 0.1 0.157 0.004
1.5 0.1 0.059 0.004
F
CHIP cavity
K
1.75 0.1 0.069 0.004
T
16.0 0.3 0.630 0.012
A
7.5 0.1 0.295 0.004
B
Electrode bottom view
Taping dimensions Embossed tape 8mm wide (0.315 inches wide)
1.5 0.059
0.1 0 0.004 0
Type NR 8040
Chip cavity A B
Insertion pitch F
Tape thickness T K 0.50.1 (0.0200.004) 4.50.1 (0.1770.004)
Unit : mm (inch)
CHIP cavity
1.75 0.1 0.069 0.004
K T
8.30.1 12.00.1 8.30.1 (0.3270.004) (0.3270.004) (0.4720.004)
3.5 0.1 0.138 0.004
A B
8.0 0.2 0.315 0.008
Leader and Blank portion NR, NRH, NRS, NRG, NRV
Blank portions Chip cavity Blank portions
Electrode bottom view
Leader
F 2.0 0.05 0.079 0.002 4.0 0.1 0.157 0.004
Type NRH 2410 NR 3010 NRH 3010
Chip cavity A B 2.60.1 2.60.1 0.1020.004 0.1020.004
Insertion pitch F
Tape thickness T K 0.250.05 1.30.1 0.0090.002 0.0510.004
160mm or more (6.3 inches or more)
100mm or more (3.94 inches or more) 400mm or more (15.8 inches or more)
1.40.1 0.0550.004 4.00.1 NR 3012 3.20.1 3.20.1 0.1570.004 0.30.05 1.60.1 NRH 3012 0.1260.004 0.1260.004 0.0120.002 0.0630.004 NRV3012 NR 3015 1.90.1 0.0750.004
Unit : mm (inch)
Direction of tape feed
Embossed tape 12mm wide (0.47 inches wide)
0.1 1.5 0 0.004 0.059 0
CHIP cavity
1.75 0.1 0.069 0.004
K T
5.5 0.1 0.217 0.004
A B
12.0 0.3 0.472 0.012
F 2.0 0.1 0.079 0.004 4.0 0.1 0.157 0.004
Electrode bottom view
This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0405_pack-P1
wound0405_pack_e-01
PACKAGING
Reel size
W 2 0.5
13 0.5 2.5 or less 0.098inches or less
Reel size (Reference values) d
Type NRH2410 NR 3010 NRH 3010 NR 3012 NRH 3012 NRV 3012 NR 3015 NRS 5012 NRS 5014 NRS 5020 NRS 6010 NR 6012
D
W
1800.5 7.0870.019
601.0 2.360.04
10.01.5 0.3940.059
1803.0 7.0870.118
602.0 2.360.08
14.01.5 0.5510.059
Unit : mm (inch)
W 2 0.5
13 0.5
t
Type
D
Reel size (Reference values) d t (max.)
NR 4010 NR 4012 NR 4018 NRG 4026 NR 5040 3303.0 802.0 12.990.118 3.150.078 NR 6020 NR 6028 NR 6045 NR 8040
18.5 0.72
13.51.0 0.5310.04
22.5 0.89
17.51.0 0.6890.04
Unit : mm (inch)
Top Tape Strength
The top tape requires a peel-off force of 0.1 to 1.3N in the direction of the arrow as illustrated below.
This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0405_pack_e-01
D
W
d
D
d
wound0405_pack-P2
RELIABILITY DATA
1. Operating Temperature Range BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks Including self-generated heat 25 25 25 105 120 105
2. Storage Temperature Range BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, 40 85 NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : 0 to 40 NR10050 Type : 0 40 for the product with taping. 3. Rated current BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, Within the specified tolerance NRH24/30, NRS50/60 Type NR10050 Type
for the product with taping.
4. Inductance BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, Within the specified tolerance NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : LCR Meter : HP 4285A or equivalent, Measuring frequency : Specified frequency NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : LCR Meter : HP 4285A or equivalent, 100KHz, 1V NR10050 Type : LCR Meter : HP 4263A or equivalent, 100KHz, 1V 5. DC Resistance BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, Within the specified tolerance NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks DC ohmmeter : HIOKI 3227 or equivalent 6. Self resonance frequency BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, Within the specification NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type : Inpedance analyzer/material analyzer : HP4291A or equivalent HP4191A, 4192A or equivalent 7. Temperature characteristic BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type BRL2012, BRC2016, BRL2518, BRL3225, BRC2518, BRFL2518 Inductance change : Within 15% BRC1608 Inductance change : Within
20% NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type Inductance change : Within 20% NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type : Measurement of inductance shall be taken at temperature range within 25 85 . With reference to inductance value at 20 ., change rate shall be calculated. Change of maximum inductance deviation in step 1 to 5 Temperature at step 1 Temperature at step 2 Temperature at step 3 Temperature at step 4 Temperature at step 5 20 Minimum operating temperature 20 (Standard temperature) Maximum oparating temperature 20
This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli-RP1
wound0407_reli_e-01
RELIABILITY DATA
8. Resistance to flexure of substrate BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type No damage. NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : The test samples shall be soldered to the test board by the reflow. As illustrated below, apply force in the direction of the arrow indicating until deflection of the test board reaches to 2 mm. Force Rod 20 10 Test board size : 100 40 1.0 R230 Test board material : glass epoxy-resin Solder cream thickness : 0.12 (BR Series) Board 0.10 (NR30/40, NRV30, NRH24/30,NRG40) Test Sample R5 0.15 (NR50/60/80, NRS50/60)
45 2mm 45 2mm
Land dimension BRC1608 0.9 0.55 0.8 0.55
Land dimension BRL2012
Land dimension BRL3225 2.7 1.0 1.6 1.0
Land dimension NR30, NRH30, NRV30 2.7 0.8 1.4 0.8
Land dimension NR60, NRS60 5.7 1.6 3.1 1.6
Land dimension NR, NRS50 4.0 1.5 2.1 1.5
1.4 0.65 0.9 0.65
Land dimension
2016 1.8
Land dimension BRL2518,BRC2518,BRFL2518 1.95 0.65 1.5 0.65
Land dimension NRH24 2.0 0.7 0.75 0.7
Land dimension NR40, NRG40 3.7 1.2 1.6 1.2
Land dimension NR80 7.5 1.8 3.8 1.8
0.7 0.8 0.7
Printed board thickness : 1.0mm Unit : mm
9. Insulation resistance : between wires BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type NR10050 Type 10. Insulation resistance : between wire and core BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type NR10050 Type 11. Withstanding voltage : between wires and core BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type NR10050 Type 12. Adhesion of terminal electrode BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, Shall not come off PC board. NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : The test samples shall be soldered to the test board by the reflow. Applied force : 10N to X and Y directions. Duration : 5s. 10N, 5s Solder cream thickness : 0.15mm. BRC1608, NR10050 Type : Applied force : 5N to X and Y directions. Duration : 5s. 13. Resistance to vibration BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type Inductance change : Within 10% NR30/40/50/60/80, NRV30, NRG40, No significant abnormality in appearance. NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type : The test samples shall be soldered to the test board by the reflow. Then it shall be submitted to below test conditions. Frequency Range Total Amplitude Sweeping Method Time 10 55Hz 1.5mm (May not exceed acceleration 196m/s2) 10Hz to 55Hz to 10Hz for 1min. X Y For 2 hours on each X, Y, and Z axis. Z
Recovery : At least 2hrs of recovery under the standard condition sfter the test, followed by the measurement within 48hrs.
This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0407_reli_e-01
wound0407_reli-RP2
RELIABILITY DATA
14. Solderability BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, At least 90 of surface of terminal electrode is covered by new solder. NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050Type : The test samples shall be dipped in flux, and then immersed in molten solder as shown in below table. Flux : Methanol solution containing rosin 25%. NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : Solder Temperature Time 245 5 5 1.0 sec.
BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : Solder Temperature Time 245 5 5 0.5 sec.
Immersion depth : All sides of mounting terminal shall be immersed. 15. Resistance to soldering heat BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type Inductance change : Within 10% NR30/40/50/60/80, NRV30, NRG40, No significant abnormality in appearance. NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : 0 3 times of reflow oven at 230 MIN. for 40sec. with peak temperature at 260 5
for 5sec. for 5 seconds, 2 times. for 5 seconds, 2 times.
: NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type The test sample shall be exposed to reflow oven at 230 5 for 40 seconds, with peak temperature at 260 5 NR6020 Type : The test sample shall be exposed to reflow oven at 230 5 Test board thickness : 1.0mm Test board material : glass epoxy-resin for 40 seconds, with peak temperature at 250
0 5
16. Thermal shock BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type Inductance change : Within 10% NR30/40/50/60/80, NRV30, NRG40, No significant abnormality in appearance. NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type, NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type : The test samples shall be soldered to the test board by the reflow. The test samples shall be placed at specified temperature for specified time by step 1 to step 4 as shown in below table in sequence. The temperature cycle shall be repeated 100 cycles.
Step 1 2 3 4 Conditions of 1 cycle Temperature ( ) Duration (min) 40 3 Room temperature 85 2 Room temperature 30 3 Within 3 30 3 Within 3
17. Damp heat BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type Inductance change : Within 10% No significant abnormality in appearance. NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : Temperature Humidity Time 60 2 90 95%RH 1000 hours.
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : The test samples shall be soldered to the test board by the reflow. The test samples shall be placed in thermostatic oven set at specified temperature and humidity as shown in below table. Temperature Humidity Time 60 2 90 95%RH 500 24hour
This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli-RP3
wound0407_reli_e-01
RELIABILITY DATA
18. Loading under damp heat BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type Inductance change : Within 10% NR30/40/50/60/80, NRV30, NRG40, No significant abnormality in appearance. NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : Temperature Humidity Applied current Time 60 2 90 95 RH Rated current 1000hours.
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type : The test samples shall be soldered to the test board by the reflow. The test samples shall be placed in thermostatic oven set at specified temperature and humidity and applied the rated current continuously as shown in below table. Temperature Humidity Applied current Time 60 2 90 95 RH Rated current 500 2hour
19. Low temperature life test BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type Inductance change : Within 10% NR30/40/50/60/80, NRV30, NRG40, No significant abnormality in appearance. NRH24/30, NRS50/60 Type NR10050 Type Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : Temperature Duration 40 2 1000hours
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type, NR10050 Type : The test samples shall be soldered to the test board by the reflow. After that, the test samples shall be placed at test conditions as shown in below table. Temperature Time 40 3 500 24hour
20. High temperature life test BRC1608, BRL2012, BRC2016, BRC2518, Inductance change : Within 10% BRFL2518, BRL2518, BRL3225 Type No significant abnormality in appearance. NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type Inductance change : Within 10% NR10050 Type No significant abnormality in appearance. Test Method and Remarks BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type : Temperature Duration 85 2 1000hours
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. NR10050 Type : Temperature Time 105 3 500 24hour
Recovery : At least 2hrs of recovery under the standard condition after the test, followed by the measurement within 48 hrs. 21. Loading at high temperature life test BRC1608, BRL2012, BRC2016, BRC2518, BRFL2518, BRL2518, BRL3225 Type NR30/40/50/60/80, NRV30, NRG40, Inductance change : Within 10% NRH24/30, NRS50/60 Type No significant abnormality in appearance. NR10050 Type Test Method and Remarks NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type : The test samples shall be soldered to the test board by the reflow soldering. Temperature Applied current Time 85 2 Rated current 500 24hour
22. Standard condition BRC1608, BRL2012, BRC2016, BRC2518, Standard test condition : BRFL2518, BRL2518, BRL3225 Type Unless otherwise specified, temperature is 20 15 and 65 20 of relative humidity. When there are question concerning measurement result : In order to provide correlation date, the test shall be condition of 20 2 NR30/40/50/60/80, NRV30, NRG40, of temperature, 65 5% relative humidity. NRH24/30, NRS50/60 Type Inductance is in accordance with our measured value. NR10050 Type
This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. wound0407_reli_e-01
wound0407_reli-RP4
PRECAUTIONS
SMD Inductors 1. Circuit Design Operating environment 1. The products described in this specification are intended for use in general electronic equipment,(office supply equipment, telecommunications systems, measuring equipment, and household equipment). They are not intended for use in mission-critical equipment or systems requiring special quality and high Precautions reliability (traffic systems, safety equipment, aerospace systems, nuclear control systems and medical equipment including life-support systems,) where product failure might result in loss of life, injury or damage. For such uses, contact TAIYO YUDEN Sales Department in advance. 2. PCB Design Precautions Technical considerations Land pattern design 1. Please refer to a recommended land pattern. Land pattern design Surface Mounting Mounting and soldering conditions should be checked beforehand. Applicable soldering process to this products is reflow soldering only.
3. Considerations for automatic placement Adjustment of mounting machine 1. Excessive impact load should not be imposed on the products when mounting onto the PC boards. Precautions 2. Mounting and soldering conditions should be checked beforehand. Technical Adjustment of mounting machine consider1. When installing products, care should be taken not to apply distortion stress as it may deform the products. ations 4. Soldering Reflow soldering 1. Please contact any of our offices for a reflow soldering, and refer to the recommended condition specified. 2. This products is reflow soldering only. 3. Please do not add any stress to a product until it returns in normal temperature after reflow soldering. Lead free soldering 1. When using products with lead free soldering, we request to use them after confirming of adhesion, temperature of resistance to soldering heat, soldering etc sufficiently. Recommended conditions for using a soldering iron (NR10050 Type) Put the soldering iron on the land-pattern. Soldering iron's temperature - Below 350 Duration - 3 seconds or less The soldering iron should not directly touch the inductor. Reflow soldering 1. If products are used beyond the range of the recommended conditions, heat stresses may deform the products, and consequently degrade the reliability of the products. BRC1608, BRL2012, BRL2518, BRC2016, BRL3225 Type BRC2518, BRFL2518 Recommended reflow condition (Pb free solder) Technical considerations
300 Temperature 200 100 0 150 180 5sec max Peak 260 0/ 5 30 10sec 230 min
Precautions
NR30/40/50/60/80, NRV30, NRG40, NRH24/30, NRS50/60 Type Recommended reflow condition (Pb free solder)
300 Temperature 200 100 0 150 180 5sec max Peak 250 5/ 0 30 10sec 230 min
NR10050 Type Recommended reflow condition (Pb free solder)
300 Temperature 200 100 0 150 180 5sec max Peak 250 0/ 5 30 10sec 230 min
90 30sec
90 30sec
90 30sec
eating Time sec
eating Time sec
eating Time sec
5. Cleaning Precautions Technical considerations 6. Handling Handling 1. Keep the product away from all magnets and magnetic objects. Breakaway PC boards (splitting along perforations) 1. When splitting the PC board after mounting product, care should be taken not to give any stresses of deflection or twisting to the board. 2. Board separation should not be done manually, but by using the appropriate devices. Mechanical considerations 1. Please do not give the product any excessive mechanical shocks. 2. Please do not add any shock and power to a product in transportation. Pick-up pressure 1. Please do not push to add any pressure to a winding part. Please do not give any shock and push into a ferrite core exposure part. Packing 1. Please avoid accumulation of a packing box as much as possible. Breakaway PC boards (splitting along perforations) 1. Planning pattern configurations and the position of products should be carefully performed to minimize stress. Mechanical considerations 1. There is a case to be damaged by a mechanical shock. 2. There is a case to be broken by the handling in transportation. Pick-up pressure 1. Damage and a characteristic can vary with an excessive shock or stress. Packing 1. There is a case that transformation and a product of tape are damaged by accumulation of a packing box. Cleaning conditions 1. Washing by supersonic waves shall be avoided. Cleaning conditions 1. If washing by supersonic waves, supersonic waves may cause broken products.
Precautions
Technical considerations
7. Storage conditions Storage 1. To maintain the solderability of terminal electrodes and to keep the packing material in good condition, temperature and humidity in the storage area should be controlled. Precautions Recommended conditions Ambient temperature : 0 40 Humidity : Below 70% RH The ambient temperature must be kept below 30 . Even under ideal storage conditions, solderability of products electrodes may decrease as time passes. For this reason, product should be used within 6 months from the time of delivery. In case of storage over 6 months, solderability shall be checked before actual usage. Storage 1. Under a high temperature and humidity environment, problems such as reduced solderability caused by oxidation of terminal electrodes and deterioration of taping/packaging materials may take place.
Technical considerations
This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs.
wound0407_reli-RP5
wound0407_reli_e-01

▲Up To Search▲

Price & Availability of NRS5012T100M

	To Download NRS5012T100M Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .